|
 Electric
Motor Driven
Oil and Gas Fired Heaters
Pressure Washers, Steam Cleaners and
Phosphatizers
Click here
to see specifications
This series can be configured as either
Pressure Washers, Steam Cleaners or for Phosphatizing; fueled
by diesel fuel, heating oil, kerosene, natural gas, propane
or butane with flow rates up to 15 gpm and pressure up to
5000 psi. Available with a wide range of accessories such
as automatic shutdown, remote control, rotating nozzles
(TurboLaser), concrete mowers (Pathmaker), foot guns and
chemical injection options. Where this equipment is used
daily or is important to your operation, be sure to consider
the Heavy Duty models and if it is used extensively or is
critical to your operation, the Severe Duty models would
be recommended.
Typical specifications:
Motor,
totally enclosed fan cooled.
Drive,
direct or belt.
Pump options,
various duty levels:
Heavy Duty - Proven highest quality pressure washer pumps,
operated at maximum rated rpm and up to maximum rated pressure.
Severe Duty
- The same highest quality pumps operated at reduced rpm
and pressure to extend the maintenance intervals and life
of the pump.
Industrial Duty
and Continuous Duty pumps
are also available.
Heater, schedule 80 coils, insulated and enclosed in a steel
jacket. Standard features include suction strainer, inlet
thermal relief valve, unloader bypass valve, redundant pressure
relief valve, adjustable chemical injection valve, 3/8"
x 50' high pressure hose with quick couplers, shut off gun,
lance, nozzles and formed steel base or fabricated steel
base with epoxy coating.
|
