Power Source Engine
Heating Type Oil
Temperature Hot or Cold
Configurations Pressure Washer, Steam Cleaner or Phosphatizing
Flow Rate Up to 15 gpm
Pressure Up to 3,000 psi
Accessories Automatic Shutdown, Remote Control, Rotating Nozzles, Concrete Mowers, Foot Guns & Chemical Injection Options

 

Request a Quote

 


This series can be configured as either Pressure Washers, Steam Cleaners or for Phosphatizing. The engines are gasoline or diesel with either air or liquid cooling. The engines are sized for continuous operation the heater is fueled by diesel fuel, heating oil or kerosene. Pressure and flow rates up to 15 gpm and pressure up to 3000 psi (custom designs available if requirements are beyond these flows and pressures). Available with a wide range of accessories such as automatic shutdown, remote control, rotating nozzles (TurboLaser), concrete mowers (Pathmaker), foot guns and chemical injection options. Where this equipment is used daily or is important to your operation, be sure to consider the Heavy Duty models and if it is used extensively or is critical to your operation, the Severe Duty models would be recommended.

Typical Specifications:

In addition to the Engine Driven (Cold)

Heater: Schedule 80 coils, insulated and enclosed in a steel or optional stainless steel jacket, a motor driven burner which is sized to provide a clean burn of the fuel to maximize the efficiency of the heater while to minimize maintenance. The burner is typically DC powered from the engine however belt driven AC generators are also available.

Note the following are for both the Engine Driven (Cold) and the Engine Driven – Oil Heated (Hot and Cold) models.

Download our Engine Driven Motor Chart (PDF)

Gasoline Engines:Gasoline Engines:
GPM PSI 6 HP GPM PSI 25 HP
4.2 1450 1504G 5.6 5025 5006G
3.1 2325 1903G GPM PSI 30 HP
GPM PSI 9 HP 6.6 4850 5007G
8.0 1150 1208G 6.0 5750 6006G
7.2 1450 1507G GPM PSI 35 HP
6.1 1625 1606G 6.6 5750 6006G
5.4 1850 1805G GPM PSI 65 HP
4.6 2325 2305G 10.0 7100 7010G
GPM PSI 13 HP Diesel Engines:
6.0 2250 2306G GPM PSI 10 HP
5.4 2350 2405G 8.1 1175 1208D
4.4 2550 26054G 7.3 1475 1507D
3.5 4000 4003G 5.3 2000 2005D
GPM PSI 15 HP 5.0 2375 2305D
8.0 1775 1808G 4.5 2275 2604D
7.2 2075 2007G 3.9 3025 3004D
5.9 2475 2506G GPM PSI 13 HP
5.3 3125 2705G 8.0 1775 1808D
4.4 3125 3104G 7.1 2500 2507D
GPM PSI 16 HP 5.8 3175 3206D
7.2 2300 2207G 5.1 3450 3405D
5.9 2825 2806G 4.5 4000 4005D
4.3 3025 3604G GPM PSI 19 HP
GPM PSI 18 HP 7.9 2500 2508D
7.9 2475 2508G 5.1 5175 5005D
7.2 2525 2507G 4.7 5600 5505D
5.9 3250 3206G GPM PSI 26 HP
5.2 3550 3505G 6.4 4550 4506D
4.5 4000 4005G 5.9 5600 5506D
3.9 4975 5004G 5.4 5725 6005D
GPM PSI 20 HP GPM PSI 31 HP
6.1 3500 3506G 6.6 5750 6007D
5.0 4050 4105G GPM PSI 40 HP
4.8 4475 4505G 9.0 6625 6609D
Oil and Gas fired heaters available up to 5000 psi.

Request a Quote

Fields marked with * are required.