Power Source Electric Motor
Heating Type Oil - Diesel Fuel, Heating Oil or Kerosene
Temperature Hot or Cold
Configurations Pressure Washer, Steam Cleaner or Phosphatizing
Flow Rate Up to 15 gpm
Pressure Up to 3,000 psi
Accessories Automatic Shutdown, Remote Control, Rotating Nozzles, Concrete Mowers, Foot Guns & Chemical Injection Options

 

Request a Quote

 


This series can be configured as either Pressure Washers, Steam Cleaners or for Phosphatizing; fueled by diesel fuel, heating oil or kerosene with flow rates up to 15 gpm and pressure up to 3000 psi. Available with a wide range of accessories such as automatic shutdown, remote control, rotating nozzles (TurboLaser), concrete mowers (Pathmaker), foot guns and chemical injection options. Where this equipment is used daily or is important to your operation, be sure to consider the Heavy Duty models and if it is used extensively or is critical to your operation, the Severe Duty models would be recommended.

Typical Specifications:

In addition to the Electric Motor Driven (Cold)

Heater, schedule 80 coils, insulated and enclosed in a steel or optional stainless steel jacket, a motor driven burner which is sized to provide a clean burn of the fuel to maximize the efficiency of the heater while to minimize maintenance.

Download our Standard Model Chart (PDF)

Electric Motor Driven Models
The following is a typical list of pump and motor combinations which are available either with or without heaters.
The heaters are available for use with fuels such as: diesel, kerosene, natural gas, butane, propane or electricly powered.
 
Standard Duty
 
Model psi GPM
1.5 hp 3450 RPM
1302E4 1,275 1.7
0803E4 800 1.7
2.0 hp 3450 RPM
1003E2 975 2.7
1.5 hp 1725 RPM
0304E4 525 4.3
0405E4 400 4.8
0504E4 475 4.1
0604E4 575 3.6
0703E4 725 3.0
1002E4 1,0000 2.0
2.0 hp 1725 RPM
0405E4 400 4.8
0504E4 475 4.1
0704E4 675 4.1
0804E4 800 3.6
0903E4 850 3.0
1302E4 1,300 2.0
3.0 hp 1725 RPM
0905E4 925 4.8
1004E4 1,025 4.3
1104E4 1,050 4.1
1204E4 1,225 3.6
1303E4 1,275 3.1
1403E4 1,350 2.9
5.0 hp 1725 RPM
1504E4 1,450 4.2
1505E4 1,450 4.8
1804E4 1,775 4.0
20004E4 1,950 3.5
2303E4 2,325 3.1
7.5 hp 1725 RPM
2105E4 2,100 4.7
2304E4 2,325 4.2
2904E4 2,550 4.0
3004E4 3,075 3.5
10 hp 1725 RPM
2505E4 2,450 4.7
3104E4 3,150 4.0
Heavy Duty
 
Model psi GPM
3.0 hp 1725 RPM
0905E4 875 4.7
0606E4 550 5.5
0706E4 675 6.1
0507E4 525 7.3
0308E4 275 8.0
5.0 hp 1725 RPM
1505E4 1,500 4.6
1205E4 1,175 5.4
1006E4 1,025 6.1
0907E4 925 7.3
0608E4 625 8.0
7.5 hp 1725 RPM
2205E4 2,225 4.5
2005E4 2,025 5.3
1806E4 1,750 6.0
1507E4 1,450 7.2
1108E4 1,125 7.9
10 hp 1725 RPM
3004E4 3,025 4.4
2605E4 2,625 5.3
2406E4 2,450 5.9
2305E4 2,275 5.3
2007E4 2,025 7.1
1708E4 1,725 7.9
15 hp 1725 RPM
3104E4 3,125 4.4
3105E4 3,100 5.3
3206E4 3,275 5.9
2307E4 2,325 7.2
2508E4 2,500 7.9
Severe Duty
( C-Face Drive )
Model psi GPM
2.0 hp 1140 RPM
0803E6 825 3.2
0704E6 725 3.8
0505E6 475 5.2
0504E6 550 4.4
0306E6 325 5.8
3.0 hp 1140 RPM
1203E6 1,300 3.1
1104E6 1,175 3.8
1004E6 950 4.4
0705E6 750 5.2
0606E6 600 5.8
5.0 hp 1160 RPM
1903E6 1,900 3.1
1804E6 1,850 3.7
1604E6 1,550 4.3
1305E6 1,275 5.1
0906E6 925 5.7
7.5 hp 1140 RPM
3003E6 2,950 3.0
2604E6 2,625 3.6
2204E6 2,400 4.3
2005E6 2,075 5.0
1706E6 1,775 5.7
10 hp 1160 RPM
3204E6 3,300 3.6
3004E6 2,900 4.3
2405E6 2,425 5.1
2206E6 2,325 5.7
Severe Duty
( Belt Drive )
Model psi GPM
2.0 hp 1725 RPM
0803E4 825 3.2
0704E4 700 3.8
0604E4 550 4.4
0505E4 475 5.1
3.0 hp 1725 RPM
1104E4 1,150 3.8
1004E4 925 4.4
0705E4 725 5.1
0606E4 600 5.8
5.0 hp 1725 RPM
1804E4 1,800 3.7
1504E4 1,500 4.3
1405E4 1,400 5.1
1306E4 1,275 5.7
7.5 hp 1725 RPM
3104E4 3,100 3.5
2604E4 2,650 4.1
2505E4 2,450 4.3
2304E4 2,325 4.6
2105E4 2,125 5.1
1706E4 1,725 5.9
10 hp 1725 RPM
3204E4 3,275 4.1
3105E4 3,175 4.5
3005E4 2,975 4.7
2805E4 2,800 5.0
2305E4 2,300 4.9
2506E4 2,525 5.6

Request a Quote

Fields marked with * are required.