Power Source Motor
Heating Type Electric
Temperature Cold
Flow Rate Up to 600 gpm
Pressure Up to 10,000 psi
Drive Up to 250 hp

 

Request a Quote

 


Pressure Washers, Sewer Jetters, Hydrostatic Test Equipment and Custom Pump Packages for Hazardous or Non-Hazardous areas

Hundreds of electric pressure and flow combinations available, flow rates to 600 gpm, pressures to 10,000 psi, drives to 250 hp for hazardous or non-hazardous areas.

Typical specifications:

  • Motor Starter: the standard enclosure for non-hazardous applications is NEMA 4X, for hazardous areas the standard is NEMA 7/4X.

  • Electrical wiring: land based applications wiring is in compliance with the National Electrical Code and consists of PVC coated flexible steel conduit with liquid tight connectors. Marine environment wiring is marine cable and glands with copper free aluminum electrical fittings.

  • Motor: TEFC (totally enclosed fan cooled) and in compliance with the Energy Independence and Security Act (“EISA”). Marine applications use a severe duty motor which meet the weatherproof requirements for IEEE 45 and USCG 259 marine duty (below deck).

  • Drives: designs include v-belt drives, direct coupled and c-face mounted direct coupled.

  • Pumps: options for various duty levels of operation.

Heavy Duty: Proven highest quality pressure washer pumps, operated at maximum rated rpm and up to maximum rated pressure.

Severe Duty: The same highest quality pumps operated at reduced rpm and pressure to extend the maintenance intervals and life of the pump.

Industrial Duty and Continuous Duty pumps are also available.

Standard features include:

  • Strainer: heavy duty cast bronze.

  • Thermal relief valve designed to prevent overheating of the pump.

  • Unloader bypass valve, the primary pressure relief valve.

  • Safety pressure relief valve is a redundant safety back up for the unloader valve.

  • Chemical injectors are typically the downstream type where the chemical injector is located after the pump and in heated units, after the heater.

  • Hoses sized for minimal pressure loss and a 4:1 safety.

  • Spray gun assemblies typically consist of a trigger gun, lance, twin nozzle holder with high-pressure narrow fan nozzle and low-pressure chemical application nozzle.

  • Frame heavy duty constructed of structural steel.

  • Corrosion protection, the standard is two party high build epoxy and an option is a standard marine multi step coating. All nuts and bolts are 316 stainless steel.

Download our Standard Model Chart (PDF)

Electric Motor Driven Models
The following is a typical list of pump and motor combinations which are available either with or without heaters.
The heaters are available for use with fuels such as: diesel, kerosene, natural gas, butane, propane or electrically powered.
 
duty chart
Standard Duty
 
Model psi GPM
1.5 hp 3450 RPM
1302E4 1,275 1.7
0803E4 800 1.7
2.0 hp 3450 RPM
1003E2 975 2.7
1.5 hp 1725 RPM
0304E4 525 4.3
0405E4 400 4.8
0504E4 475 4.1
0604E4 575 3.6
0703E4 725 3.0
1002E4 1,0000 2.0
2.0 hp 1725 RPM
0405E4 400 4.8
0504E4 475 4.1
0704E4 675 4.1
0804E4 800 3.6
0903E4 850 3.0
1302E4 1,300 2.0
3.0 hp 1725 RPM
0905E4 925 4.8
1004E4 1,025 4.3
1104E4 1,050 4.1
1204E4 1,225 3.6
1303E4 1,275 3.1
1403E4 1,350 2.9
5.0 hp 1725 RPM
1504E4 1,450 4.2
1505E4 1,450 4.8
1804E4 1,775 4.0
20004E4 1,950 3.5
2303E4 2,325 3.1
7.5 hp 1725 RPM
2105E4 2,100 4.7
2304E4 2,325 4.2
2904E4 2,550 4.0
3004E4 3,075 3.5
10 hp 1725 RPM
2505E4 2,450 4.7
3104E4 3,150 4.0
Heavy Duty
 
Model psi GPM
3.0 hp 1725 RPM
0905E4 875 4.7
0606E4 550 5.5
0706E4 675 6.1
0507E4 525 7.3
0308E4 275 8.0
5.0 hp 1725 RPM
1505E4 1,500 4.6
1205E4 1,175 5.4
1006E4 1,025 6.1
0907E4 925 7.3
0608E4 625 8.0
7.5 hp 1725 RPM
2205E4 2,225 4.5
2005E4 2,025 5.3
1806E4 1,750 6.0
1507E4 1,450 7.2
1108E4 1,125 7.9
10 hp 1725 RPM
3004E4 3,025 4.4
2605E4 2,625 5.3
2406E4 2,450 5.9
2305E4 2,275 5.3
2007E4 2,025 7.1
1708E4 1,725 7.9
15 hp 1725 RPM
3104E4 3,125 4.4
3105E4 3,100 5.3
3206E4 3,275 5.9
2307E4 2,325 7.2
2508E4 2,500 7.9
Severe Duty
( C-Face Drive )
Model psi GPM
2.0 hp 1140 RPM
0803E6 825 3.2
0704E6 725 3.8
0505E6 475 5.2
0504E6 550 4.4
0306E6 325 5.8
3.0 hp 1140 RPM
1203E6 1,300 3.1
1104E6 1,175 3.8
1004E6 950 4.4
0705E6 750 5.2
0606E6 600 5.8
5.0 hp 1160 RPM
1903E6 1,900 3.1
1804E6 1,850 3.7
1604E6 1,550 4.3
1305E6 1,275 5.1
0906E6 925 5.7
7.5 hp 1140 RPM
3003E6 2,950 3.0
2604E6 2,625 3.6
2204E6 2,400 4.3
2005E6 2,075 5.0
1706E6 1,775 5.7
10 hp 1160 RPM
3204E6 3,300 3.6
3004E6 2,900 4.3
2405E6 2,425 5.1
2206E6 2,325 5.7
Severe Duty
( Belt Drive )
Model psi GPM
2.0 hp 1725 RPM
0803E4 825 3.2
0704E4 700 3.8
0604E4 550 4.4
0505E4 475 5.1
3.0 hp 1725 RPM
1104E4 1,150 3.8
1004E4 925 4.4
0705E4 725 5.1
0606E4 600 5.8
5.0 hp 1725 RPM
1804E4 1,800 3.7
1504E4 1,500 4.3
1405E4 1,400 5.1
1306E4 1,275 5.7
7.5 hp 1725 RPM
3104E4 3,100 3.5
2604E4 2,650 4.1
2505E4 2,450 4.3
2304E4 2,325 4.6
2105E4 2,125 5.1
1706E4 1,725 5.9
10 hp 1725 RPM
3204E4 3,275 4.1
3105E4 3,175 4.5
3005E4 2,975 4.7
2805E4 2,800 5.0
2305E4 2,300 4.9
2506E4 2,525 5.6

Request a Quote

Fields marked with * are required.