Acme Cleaning Equipment, Inc. is pleased to offer our customers the benefits of having a cleaning system that best fits their needs at a price that is price competitive with assembly line produced equipment. Our industrial pressure washers are built with the highest quality components based on your application and environment.

Things to consider when choosing wash equipment include:

Type of Cleaning

What pressure and flow rate will provide the most efficient results? We consider the pressure to be more of a cutting action where the flow rate provides more of a pushing action. Typical examples are a coin-operated car wash usually is about 4 gpm at 1000 psi; where a truck wash is more like 5 gpm at 1500 psi and concrete cleaning 5 to 6 gpm at 2500 to 3000 psi. Is some type of automation required?

Duty Cycle

How often and how long are the cleaning tasks to be performed? The longer the cleaning task and the more often the task; the more durable the components need to be.

Controls

If the cleaning task is performed by one operator at a time and the equipment is located close to the task then the on/off controls can be mounted on the equipment. However, if there are more than one operator, in multiple locations then the controls need to be mounted at the task. In many cases it is more efficient for the equipment to be provided with what we call “Automatic Operation” where the actuating of the spray  wand starts and stops the equipment.

Environment

If the equipment is located in a marine environment, an environment in which there could be hazardous gasses or one where the ambient temperature is unusually high or low; considerations on which components would be best need to be made.

Size or Location Limitations:

Are there size or portability considerations? Does the equipment need to be wall mounted; need a roll cage type of protection; length, width or height limitations or need to be mounted in a location remote from the task?

GPMPSI3 HP
4.4 925 0904E
5.5 550 0606E
6.1 675 0706E
7.3 525 0507E
8.0 275 0308E
GPMPSI5 HP
4.6 1500 1505E
5.4 1175 1205E
6.1 1025 1006E
7.3 925 0907E
8.0 625 0608E
GPMPSI7.5 HP
4.5 2225 2205E
5.3 2025 2005E
6.0 1750 1806E
7.2 1450 1507E
7.9 1125 1108E
GPMPSI10 HP
4.4 3025 3004E
5.3 2625 2605E
5.9 2450 2506E
7.1 2025 2007E
7.9 1725 1708E
GPMPSI15 HP
4.4 4800 4804E
4.7 4400 4305E
5.3 3100 3105E
6.0 3375 3206E
7.2 2325 2307E
GPMPSI15 HP
7.9 2500 2508E
8.6 2475 2509E
10.6 1975 2010E
GPMPSI20 HP
5.0 4850 5005E
6.4 3900 4006E
8.6 2975 3009E
GPMPSI25 HP
5.5 6050 6005E
5.9 5625 5606E
7.9 3900 3908E
12.7 2875 2913E
GPMPSI30 HP
5.4 7375 7205E
7.2 5750 6007E
8.1 5300 5008E
9.9 3950 4010E
GPMPSI40 HP
6.0 8925 9006E
8.6 6050 6008E
11.7 4525 4512E
13.7 3800 3813E
15.3 3250 3215E
GPMPSI50 HP
3.9 14900 14004E
6.4 10175 10006E
8.9 7500 7509E
10.4 5975 5910E
11.6 6000 6012E

Request a Quote

Fields marked with * are required.